disable vlan

disable [ {vlan} vlan_name | vlan vlan_list]

Description

Use this command to disable the specified VLAN.


`vlan_name`	Specifies the VLAN you want to disable.
`vlan_list`	Specifies the VLAN list of IDs to disable.

Enabled.

This command allows you to administratively disable specified VLANs. The following guidelines apply to working with disabling VLANs:

Disabling a VLAN stops all traffic on all ports associated with the specified VLAN.
You cannot disable a VLAN that is running Layer 2 protocol control traffic for protocols such as EAPS, STP, or ESRP.

When you attempt to disable a VLAN running Layer 2 protocol control traffic, the system returns a message similar to the following:
```
VLAN accounting cannot be disabled because it is actively used by an L2 Protocol
```
You can disable the default VLAN; ensure that this is necessary prior to disabling the default VLAN.
You cannot disable the management VLAN.
You cannot bind Layer 2 protocols to a disabled VLAN.
You can add ports to or delete ports from a disabled VLAN.

Caution

Disabling the Mgmt VLAN disables access to the Ethernet Management port on a switch (disable vlan Mgmt).

The following example disables the VLAN named "accounting":

disable vlan accounting

This command was first available in ExtremeXOS 11.4.

The ability to add ports to a disabled VLAN was added in ExtremeXOS 12.5.

The vlan_list option was added in ExtremeXOS 16.1.

This command is available on all Universal switches supported in this document.